Primo Water Dispenser With Keurig

How Do You Unclog A Primo Water Dispenser

Primo: k cups with my water dispenser

Mineral deposits can clog your dispenser making it less effective or causing water to leak from the tap. To unclog the dispenser, you need the following items:

Two tablespoons regular bleach or 2 cups of distilled white vinegar
One empty 5-gallon bottle

To unclog your Primo water dispenser:

Turn energy saving switches to OFF.

Unplug power cord from the wall outlet.

Remove water bottle.

Move appliance away from wall to gain access to the back.

Remove remaining water from reservoirs by dispensing from the hot and cold taps into a pitcher or bucket.

Remove the cap from a spare empty 5 gallon bottle. Pour 2 tablespoon of bleach or 2 cups of vinegar and hot tap water into the empty bottle.

Apply the cleaning bottle to the dispenser.

Allow the cleaning solution to fill the reservoirs.

Wait 10 minutes then drain the water from the reservoirs as described in step 5.

Rinse the bottle and fill with only hot tap water and apply it to the dispenser.

Place a 2-gallon bucket in the back of the appliance and remove the drain plug, while also flushing water through the taps .

Replace the silicone plug and drain cap.

Return the unit to its location, install a fresh water bottle, plug the power cord into the grounded wall outlet and turn the energy saving switch ON.

Where Can I Buy Primo H Trio Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black Online At The Best Price In The India

desertcart is the best online shopping platform where you can buy Primo H TRIO Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black from renowned brand. desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Primo Water Dispenser Leaking

If your water dispenser is leaking, the bottle may have a leak that is too large for the Leak Guard feature to stop. To troubleshoot the problem:

Remove the bottle, dispense one quart of water and install a new bottle. If there is still a leak, remove the bottle and contact Primo customer service for further assistance.

If water is leaking from the tap, there is a possibility of minerals buildup in your system. If this is the case, cleaning the minerals deposit should resolve the issue.

Also Check: Mobile Home Gas Water Heater

Primo Water Dispenser Troubleshooting Hot Water Not Working

It takes 15-20 minutes after setup to dispense hot water. If there is still no hot water, try these troubleshooting instructions:

Make sure the power cord is properly connected to a working outlet.
Make sure red switch on the back of the dispenser is ON.
If the problem doesnt resolve, turn all switches to the off position.
Unplug the unit from the wall outlet.
After a few minutes, plug the unit back on and give it one hour and recheck the water temperature.

Why Is My Primo Water Dispenser Not Working

If the water is room temperature, try the following tips to solve the problem:

Check to ensure the main plug is properly plugged in and not having a short circuit.
Make sure that hot and cold water buttons are not off and the power club is plugged in the socket at the back of your dispenser.
Check that the hot/cold water light is turned on after reclogging. If it is not turned on, dispense a couple of glasses and wait for about 5-10 minutes for the LED indicator to turn on.
Try resetting your dispenser by removing some liters of water from it and giving it 24 hours to settle down. Then plug it and turn the buttons on, wait for about 4 hours and try gain.
If the problem persists, it may be due to faulty wiring. You may need to call in a professional to look into it.

If water is not coming out from both the taps on your Primo dispenser, it may be due to a faulty seal on a water bottle or an air-lock. To troubleshoot this problem:

Check the water bottle before loading it. You can also remove the bottle and check the seal.

To remove the air-lock:

Then place the bottle back.
If everything is fine, you should hear water gurgling down the reservoir.

You May Like: Honda High Pressure Water Pump

Does The Primo Dispenser Filter Water

Primo dispensers dont come with filters and thus dont filter water at the unit. However, Primos pre-filled exchange water and Primos self-service refill water has gone through a purification process that includes carbon filtration, ultraviolet sterilization, and reverse osmosis. With no filter to replace, the dispenser is convenient and low maintenance.

Cleaning Hot & Cold Reservoirs And Water Lines

Make sure you clean the dispenser to dissolve mineral deposits, sanitize, and deodorize it every 3-4 months or whenever an off-taste occurs. To do this, you will need the following items:

Two tablespoon regular bleach or 2 cups of distilled white vinegar
One empty 5-gallon bottle

Then follow these steps to clean your dispenser:

Turn energy saving switches to OFF.

Unplug the power cord from the wall outlet.

Remove the water bottle.

Move appliance away from the wall to gain access to the back.

Remove remaining water from reservoirs by dispensing from the hot and cold taps into a pitcher or bucket.

Remove the cap from a spare empty 5-gallon bottle. Pour 2 tablespoon of bleach or 2 cups of vinegar and hot tap water into the empty bottle.

Apply the cleaning bottle to the dispenser.

Allow the cleaning solution to fill the reservoirs.

Wait 10 minutes then drain the water from the reservoirs as described in step 5.

Rinse the bottle and fill with only hot tap water and apply it to the dispenser.

Place a 2-gallon bucket in the back of the appliance and remove the drain plug, while also flushing water through the taps .

Replace the silicone plug and drain cap.

Return the unit to its location, install a freshwater bottle, plug the power cord into the grounded wall outlet, and turn the energy-saving switch ON.

Read Also: Point Of Use Electric Water Heater

Is Primo H Trio Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black Available And Ready For Delivery In In India

desertcart ships the Primo H TRIO Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black to and more cities in India. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Primo H TRIO Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black speedily without the hassle of shipping, customs or duties.

Primo Water Dispenser Troubleshooting Guide: Solutions To 7 Popular Problems

Primo Water Dispenser with Single Serve Brewing Review

By homoes

Primo Water Dispensers are one of the best water dispensers available on the market currently. They are durable, economical and best suited for all your needs for home and office use.

Primo water dispensers, if cleaned and maintained properly, do not have any issues in their working. However, over time some problems can disturb them. If you are facing issues with Primo units like water leakage, water pump issues, hot and cold water issues, or a slow flow rate, then you dont instantly need to call a professional for help.

For this, firstly, you need to identify the kind of water you treat and the pollutants you want to remove. All types of water are different based on their quality standard, and it decides the solution. You can get rid of these problems by yourself without wasting a single penny from your pocket. It is advisable to use some modern certified filter systems like NSF 53 certified water filtersthat meet all the standards.

In this troubleshooting guide, we are going to discuss how you can deal with such problems with Primo dispensers.

You May Like: How To Change Water Filter In Fridge

Cleaning The Dispenser Helps In Avoiding Problems

Make sure you clean your dispenser every 3-4 months. While you are cleaning, do not remove the top cover of the dispenser as it is attached with a precision sealed gasket and it can result in leakage. If you are unable to deal with the problems mentioned above yourself, you can always give a call to Primo Team at 844.23PRIMO or contact at https://primowater.com/Support/ for further information.

How To Set The Temperature On A Primo Water Dispenser

Adjusting the temperature of the cold water from a Primo dispenser is easy, and doesnt need any tools. Follow these steps to set the temperature on your dispenser:

Move your Primo water dispenser away from the wall. While doing this, be careful not to tip or spill the water bottle.

On the back of the water dispenser, locate the flat, brass-colored screw. For colder water, turn the screw slightly clockwise. Turn it counterclockwise for warmer water.

Then give it about an hour for the water temperature to stabilize.

Check the water temperature. Continue adjusting the knob, as necessary, until it reaches your desired temperature.

Slide your water dispenser back into its original position.

Also Check: This Is Water David Foster Wallace

Water Is Not Dispensing From Both Taps

If you are facing the problem of water not coming out from both the taps on your dispenser, it may be because of a faulty seal on a water bottle or an air-lock. The best way to deal with this problem is to check the water bottle before loading it carefully, or you can remove it and check the seal. To remove the air-lock, you need to remove the water bottle, empty the reservoir and then place the bottle back. If everything is fine now, you will hear water gurgling down the reservoir.

How To Self Clean A Primo Water Dispenser

Primo Bottom Load Self Cleaning Water Dispenser Stainless Steel Black ...

The International Bottled Water Association together with other water and sanitization organizations will ensure that the water you purchase is pure and clean. It is therefore important to be consistent with good sanitation techniques to ensure that we are getting clean water from the dispenser and prevent possible bacteria build-up. Cleaning and sanitizing your dispenser periodically or in the recommended frequency of cleaning once every 3 to 6 months can guarantee you and your family clean, germ-free drinking water.

Fortunately, cleaning and sanitizing your dispenser requires only a few minutes of your time, water, and either bleach or vinegar.

The following simple cleaning procedures will help clean most models of bottled water dispensers save for the self-cleaning models.

Before starting the cleaning, unplug your dispenser and assemble the required items that include water, vinegar or bleach, a sponge, and a clean cloth.

Cleaning Using Bleach

Read Also: Water Heater Tankless Vs Tank

Primo Water Dispenser Cooling Problems

It takes up to one hour after setup to dispense cold water. If cold water is still not cold, try these other troubleshooting instructions:

Make sure the power cord is properly connected to a working outlet.
Make sure the back of the dispenser is at least 4 inches from a wall and there is free airflow on all 4 sides of the dispenser.
Make sure the tank is not overfilled due to a bottle leak. Dispense water until bubbles appear in the bottle.
Make sure the green switch on the back of the dispenser is ON.

If an issue is proving difficult to resolve, you should consider calling a professional for assistance. Also, you can get in touch with Primo customer service for additional issues or queries you may have regarding your unit.

Posted on Last updated:

Why Is My Primo Water Dispenser Red Light Blinking

A blinking red light alerts you when your bottle is empty. Replace the bottle as soon as possible when you get this alert code. Follow the steps below to replace the bottle:

Open your dispenser door and slide the empty bottle out of the cabinet.

Remove probe assembly from empty bottle. Place probe assembly on probe hanger.

Set the empty bottle aside.

Place a fresh bottle outside of cabinet. Remove the entire plastic cap from the top of the bottle. Clean the outside of the new bottle with a cloth.

Place the probe into the bottle. Slide collar down until it clicks in place. Push head down until the tube hits the bottom of the bottle.

Slide the bottle into the cabinet and close the door.

Recommended Reading: Water Filter For Well System

Primo Water Dispenser Troubleshooting

Home » Kitchen » Primo Water Dispenser Troubleshooting

Primo water dispensers are among the best in the market. They come in various models, including top and bottom-loading types, and are designed with the home and office in mind. But, like all machines, you might encounter some problems with your system, so it is great to know Primo water dispenser troubleshooting techniques for your device. Here is a simple guide to help you resolve some of the common issues with these dispensers.

Primo Bottom Loading Water Dispenser With Single

Water Dispenser with Primo Lock System

Money-saving coupons for Primo® water included
Single serve coffee brewing 6, 8, and 10oz.
Uses K-Cup® pods, or your own coffee grounds
Piping-hot water with child-resistant safety feature
Fast flow dispensing fills sports bottles in seconds
Built-in storage for 20 K-Cup® pods
Re-usable coffee filter included

Dimensions :Weight:Coolest Temperature Capability:Water Temperature Capability:Water Source:Hottest Temperature Capability:Appliance Placement:Wattage Output:Material:Warranty:TCINItem Number Origin

Recommended Reading: Water Filters For Ge Refrigerators

Free Standard Shipping On Orders Over $49

Free Standard Shipping with any online purchase of $49 or more . Excluding store pick up items, gift cards, gift wrap charge, environmental handling fees, other applicable handling or administrative charges, and sales tax. Shipping surcharges on certain over-sized or heavy items still apply. These charges are indicated on the appropriate product information pages and will be displayed in the shipping subtotal of your order.

} questions · }}}}}0} answers ·Ask a Question

}}} }Bed Bath & Beyond Customer} ·

} ? ‘Showing } out of ‘ + + ‘ reviews’ : ‘Showing } out of ‘ + + ‘ reviews'”> Showing } out of } reviews

Is It Safe To Buy Primo H Trio Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black On Desertcart

Yes, it is absolutely safe to buy Primo H TRIO Water Dispenser With K Cup Coffee Brewing Bottom Loading 2 Temp Hot Cold Water Cooler Water Dispenser For 5 Gallon Bottle Black from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.

You May Like: Hot Water Tank 50 Gallon

Hot Water And Cold Water Issues Water At Room Temperature

A majority of people face the problem of hot and cold water issues. You can solve this problem by using the following tips. However, if you still fail to get hold/cold water, you need to get professional help as it is due to some technical problem or compressor issues. Make sure you check hot and cold water dispensing one by one and not at the same time.

First of all, check that the main plug is properly plugged in and is not having a short circuit. Makes sure that hot and cold water buttons are not off and the power club is plugged in the socket at the back of the dispenser.

As s second option, check that the light of hot/cold water is turned on after reclogging, if it is not turned on, dispense a couple of glasses and wait for 5-10 minutes for the LED indicator to turn on.

You can also reset your dispenser by removing a couple of liters of water from it and giving it 24 hours to settle down. Plug-in the dispenser and turn on the buttons, wait for 3-4 hours and then try again.

Latest Posts